Line 6 Spider Valve 112 40 Watt 1x12 Guitar Modeling Combo Amplifier

Compare To: $699.99 Line 6 Flextone III XL Guitar Combo Amp $699.00 Fender® Hot Rod Deluxe Tube Amplifier $679.00 Randall RG200G3PLUS 200W Guitar Combo Amp $639.00 Laney VC15-110 15 Watt Guitar Tube Combo Amp

Spider Valve™ is the result of a groundbreaking collaboration between Line 6 and Reinhold Bogner fusing the versatility of modeling with the performance and feel of a world-class tube amplifier.

Just as we revolutionized the world of amps through our pioneering modeling technology, Spider Valve shatters the boundaries of tube amp performance by applying that same tonal range to Bogner’s all-tube amp design, boutique component selection and stellar voicing.

Spider Valve delivers 12 channels of amp modeling - combined with several flavors of built-in modulation, delay and reverb – driven by an all tube, all Bogner amplification design boasting 6L6 power tubes, 12AX7 preamp tubes and premium Celestion® Vintage 30 speakers.

Combining the performance, response and feel of a well crafted tube amp with the inspiring capabilities of amp and effect modeling - Spider Valve delivers the best of both worlds.

The Spider Valve design combines 12AX7 preamp tubes with Line 6’s signature modeling front-end, a marriage that allows each part of the sonic equation to deliver what it does best: creamy, cascading distortion and enriched harmonics from the tubes, and 12 of the world’s finest amp models and seven stunning effects from the modeling front end. And, of course, perfectly matched 6L6 power tubes driving Celestion® Vintage 30 speakers to deliver unprecedented sonic impact and spatial imaging.

With the simple front-end controls and display, programmable patches and presets are instantly within reach. Tweak your tone even further with the front panel Presence, Drive, Bass, Mid and Treble controls: this is a true-blue tube amp, and it acts like one, responding and delivering all the analog detail, performance and warmth of every amp model and effect.

Here’s the guide to your Spider Valve tone palette:

Clean Amber:

• Select this Amp Model and adjust the tone controls to get crisp clean tones, warm jazz timbres, and all the high-end shimmer you’ll need with a generous amount of bottom end.

Clean Blue:

• We developed this Amp Model to emulate* those classic late-’60s and early-’70s clean tones. It started off as an Amp Model based on* a 1973 Hiwatt® Custom 100. We extended the tone control range and tightened up the low end.

Twang Amber:

• This Amp Model draws on* our analysis of mid-’60’s Fender® amps, including the blackface ’65 Twin Reverb® and blackface ’64 Deluxe Reverb®. We wanted an Amp Model that has that vintage glassy high-end tone with some extra snap and bite.

Twang Blue:

• This Amp Model is based on* a number of vintage tweed amps. We evaluated a ’53 Fender® tweed Deluxe Reverb®, ’58 Fender® tweed Bassman® and a ’60 Gibson® Explorer® to create a swingin’ Rockabilly tone.

Blues Amber:

• Based on* a mix of a ’65 Marshall® JTM-45, a ’58 Fender® Bassman®, a ’63 Fender® Vibroverb and a Supro®, this Amp Model slides between gritty, swamp-infected cleans to syrupy smooth, walloping drive tones.

Blues Blue:

• This Amp Model is based on* a fawn Vox® AC-30 amplifier with an updated and expanded tone control circuit. We wanted to capture that early British pop rock tone made famous by the Beatles and the Stones.

Crunch Amber:

• This sound was crafted during our studies* of the '68 Marshall® Plexi 50 Watt. This type of Marshall® amp was used by a number of early metal bands. Crunch provides a wider range of tone control settings than the original Marshall® amp had.

Crunch Blue:

• This Amp Model is based on* a 1968 Marshall® Plexi 100 watt with a few added extras: the combination of a Variac and the jumped input channels creates that infamous brown sound.

Metal Amber:

• This Amp Model is based on* the Mesa/Boogie® Dual Rectifier®. Use this Amp Model to get a tight and punchy high-gain metal sound.

Metal Blue:

• This sound was created to be an aggressive high-gain Amp Model with a unique Mid control that will sweep though an entire spectrum of tone on one knob. The Mid knob for this Amp Model changes the character of the distortion. When set to maximum, the distortion exhibits Fuzz pedal characteristics. When the Mid is set to noon, it mimics the creamy modern high-gain amp tones. And when the Mid knob is turned down to minimum, it's very much reminiscent of that Class A sound.

Insane Amber:

• This model is our “dialed in for shredding” version based on* the Mesa/Boogie® Dual Rectifier® red channel. It combines the intensity and impact of Metal Amber, but delivers more midrange and teeth for that bone-crushing, brain piercing insane grind.

Insane Blue:

• Our goal with Insane was to provide you with as much input gain distortion as possible short of complete meltdown. You get an obscene helping of distortion, while still retaining tonal definition and character.

From the DL4™ stompbox to the Echo Farm™ plug-in, Line 6 effects have achieved cult status in top studios and stage rigs of discerning guitarists. With Spider Valve, Line 6 delivers a palette of top grade integrated effects - easily accessed and tweaked from the front panel using the SmartControl FX knobs.

Here’s the guide to your Spider Valve effects palette:

Modulation:

• A choice of phaser, chorus or tremolo lets you tweak your tone from rich luscious modulations to dramatic orbital gyrations.

Delay:

• From the swirling feedback of the sweep echo to the organic decay of the tape echo, Spider Valve delays provide an unmatched level of dimension and depth.

Reverb:

• The Spider Valve effects arsenal is complete with a dedicated reverb control – allowing you to dial in anything from subtle ambiences to cavernous spaces.

Specifications:

• 40W Class AB tube amp through (2) 12AX7 preamp tubes and (2) 6L6 power tubes
• 1X12" configuration featuring a Premium Celestion® Vintage 30 speaker
• 12 dialed-in amp models (channel voices) that deliver a complete tonal range from shimmering clean to insane grind
• 7 Smart Control FX (up to 3 simultaneous) including Tape Echo, Sweep Echo, Standard Delay (all with Tap Tempo) Chorus/Flanger, Phaser, Tremolo, and Reverb
• Built-in front panel tuner
• 36 user programmable channels
• 300+ artist created presets covering the greatest guitar tones of all time
• POD® XLR direct out for studio direct tone.
• Compatible with FBV2™, FBV Express™ and FBV Shortboard™ foot controllers
• Single and dual 1/4" speaker output jacks for connection to auxiliary cabinets
• 1/4" power amp input jack for POD® amp and effect modelers
• Weight: 45 lbs
• Dimensions: 27" L x 24" H x 15" D

Input/Outputs:

• FBV Pedal – Plug in one of our optional Line 6 FBV™ foot controllers for channel switching, tap tempo, effects on/off control, wah/volume pedals, access to 32 more channel memories, and tuner capabilities.
• Balanced Direct Out – Provides dedicated POD® -quality tone output for studio-direct recording.
• Preamp Out – This is a pre-tube amp output than can be used for all sorts of things. For one, you can drive a second amp from the Spider Valve modeling pre, or you can use it as an “effects send” to feed outboard effects. You can then use the Power Amp In as a “series effects return”.
• Power Amp In – This is a direct connection to the all-tube power amp, including the 12AX7 preamp tubes, matched 6L6 power amp tubes, Master, and Presence controls. Perfect for pairing your Bogner designed all tube power amp section with a front end modeler such as the POD® xt Live.

Speaker Outputs:

• 112 and 212 Combos
• Output A is for an 8 ohm speaker load and will let you hook up (1) 8 ohm speaker/cab
• Output B is for a 4 ohm speaker load. You can either hook up (1) 4 ohm speaker/cab or (2) 8 ohm speakers/cabs.

Browse Similar Items in:
Guitar Combo Amplifiers